Description

M12 SMT Slimline A-Coded

– Design for fully automatic SMT process

– Socket versions – Shielded and unshielded versions

– 4-pin and 5-pin versions available

– 2 installation heights for socket: E version: 17 mm and P version: 18 mm

– 3 installation heights for pin: B version: 20.5 mm and E version: 18.9 mm and P version: 21.4 mm

– narrow rectangular design with 2 mounting brackets

– Spring-elastic contact design protects against contacts tearing off

– High-temperature resistant insulating body and suction PAD

– Tape packaging –

– Coding position: 0°

– Other coding positions upon request

Technical data
Connector	M12 gemäß/ acc. to IEC 61076-2-101
Coding-No of pins	A-5/ A-4
Current rating	max. 5 A
Nominal voltage	50 V DC (5-pole) / 250 V /4-pole)
Contact resistance	≤ 10 mΩ
Insulation resistance	≥ 100 MΩ
Overvoltage category	III
Pollution degree	3
Reflow soldering temperature JEDEC J-STD-020C	20 – 40 sec at 260° C
Termination style	SMT
Coplanarity	< 0,1 mm
Reflow soldering temperature JEDEC J-STD-020C	20 – 40 sec at 260° C
Protection degree	IP 67 (only screw-locked)
Temperature range	–40° C bis/to +125° C (w/o O-Ring)
Mechanicaal lifetime	≥ 250 mating cycles
Locking screw	see accessories
Torque M12 locking	max. 0,8 Nm
Tightening torque M12 locking	3 – 4 Nm
Materials
Insulator body	Thermoplast UL 94-V0
Contact material	Cu alloy
Contact plating	Ni/Au
Sealing gland	see accessories
RoHS and REACH	conform